Customer stated oven was not getting up to temp. I diagnosed unit found bake element to be cracked and no longer heating. Ordering bake element.; ordrng 1 W10779716 (Bake element)

"Customer stated unit was making a noise. I diagnosed unit found lint to be built up around blower. I cleaned out blower wheel and ordering new lint screen to help prevent the lint built up. Customer also said that unit shuts off when in a sensor cycle. I checked resistance of the sensors which tested good. ; ordrng 1 WPW10516085 (Lint screen), dspstn on spec-tagged invntry: 1 4392067 REPAIR KIT"

Unit not making ice. Turned icemaker off and on then cycled. Ordering icemaker. ; ordrng 1 W11284458 (Icemaker)

Customer stated unit would start a cycle then drain. I diagnosed unit and found issue to be pressure tube. I tried to blow through tube but I could not. I took off back panel and noticed tube was pinched in between outter panel and bulkhead of the dryer. I repositioned tube and made sure air gets through all the way to the tub. I started a normal cycle watched it fill and advance to the wash cycle. Unit is working properly.

"Unit not filling with water and continuously draining. Inlet water low and float switch errors in memory. Ran machine through auto-diagnostic, operations normal. Verified float switch was engaging and disengaging properly."