"Call customer reports multiple off-balance load errors. F9E2, F0E5, F0E3 and F2E1 error codes stored. Suspension passes inspection. Inner basket has excessive play. Gearcase and inner tub should be replaced. Customer declined further repair."

"Replaced compressor. Vacuumed system to 500 microns and recharged with R600a. Temps, pressures, and equalization time tested good."

"Inspected both spray arms, checked door. Seal. When i started a cycle saw water leaking from the vent, I checked the vent cap inside the unit found it loose and not sealing. Tightened cap down and tested unit for a few minutes did not see any leaks."

Installed new control board and tested washer. The quick cycle is now starting with 15 minutes and all the temperature settings are available. cycles running normally.

"Compressor completely seized, overload switch clicking, compressor unable to start. Needs new compressor.; ordrng 1 W11547313 (Compressor) and 1 W11504420 (8x6) and 1 W11504431 (7x5) and 1 W11506635 (Process tube) and 1 W11506623 (5x5) and 2 W11506621 (6x6)s and 1 W11504447 (5x1.8)"