"Dispenser not opening consistently. Replaced dispenser. Ran service cycle, unit operated properly"

"Low side pressure measured -23inHg, high side measured 62psi. Unit did not equalize. Restriction in sealed system. Separated and isolated high and low sides, flushed both with 250psi nitrogen. Installed new drier. Vacuumed unit to 500 microns and recharged with 5oz of R134a. Pressures, compressor temps, and discharge temps tested good.; dspstn on spec-tagged invntry: 1 WPW10143759 DRIER-UV DYE"

Replaced UI. Set date and time. Touch controls all fully responsive

Bail arm not connected properly. Connected and tested

Voltage is getting up to the UI and the UI screen lights up however the screen and buttons do not register any touch. Ordered UI board ; ordrng 1 W11659267 (Control panel)