Replaced door lock and MCU on unit. Tested unit in auto diagnostics. Everything functioning properly. Door unlocked at end of cycle. Unit tested good.

Replaced control and door latch on unit. Calibrated unit. Tested unit in auto diagnostics. Unit tested good. ; dspstn on spec-tagged invntry: 1 W11419171 CONTROL

"Replaced suspension on unit. Tested unit in spin, tested good. Calibrated unit Unit tested good. If problem persists unit may need basket W10752719"

"F0E5 off load balance error code. Checked the basket and noticed hub felt lose. Removed hub, cleaned underneath hub and reinstalled making sure it was tight. Also when checking basket noticed left front of suspension was bad. Checked underneath unit and found a metal ant trap was stuck underneath guard for cam and belt and had been rubbing against it. Ordering suspension ; ordrng 1 W11130362 (suspension)"

When the door is opened it swings fully opened by itself when not holding onto door. Tried leveling unit so door wouldnt move by itself when opened. Needed to add shim underneath right rear of unit. Leveled again. Door no longer swings open by itself when door is open.