Customer stating that unit is flashing feature not available error code again. Previously spoke with techline when servicing unit 2 years ago and techline stated that control was causing issue. Control is still causing code to appear. Ordering control ; ordrng 1 WPW10169131 (Control) and 1 s&H

Unit not turning on. 240v to unit. Thermal fuse blown replaced fuse and tested. Unit functions properly. ; dspstn on spec-tagged invntry: 1 WP3392519 FUSE-THERMAL

Replacing user interface and control due to unit displaying f6e3 code for UI and control communication failure. Replaced both parts. Ran diagnostic cycle. Unit tests good ; dspstn on spec-tagged invntry: 1 W11135392 CONTROL

Customer stated that unit will not produce ice. Discovered that bucket was full of frozen ice. Bail arm has broken causing ice maker to constantly call for water. Removed and cleared ice from bucket. Replaced ice maker. Cycled power and heard unit fill. Unit tested good

"S16360Unit leaking when filter is installed and water is developing inside ff defrost pan. Defrosted drain and adjusted drain pan. Inspected filter area and couldn't find leak. Suspect leak is from housing. If leak occurs order housing. If ice occurs order drain kit W11457241; ordrng 1 W11194438 (Housing) and 1 Sh15, states that autho needed"