Unit is turning on but not heating . It is only getting 120 volts . Breaker is getting 240 . But found that the unit is in connected to a fuse box and a fuse is blown . Customer is going to fix the power . Customer instruct

"Customer stated that unit would stop after 10 minutes in sensor dry and sometimes on timed dry it would stop after 5 minutes . I did a continuity test on the sensor and it tested good. i ran a timed dry cycle and the unit did not stop, also tested good. I explained to the customer about mixed loads of laundry. Unit tested good"

Customer stated the freezer had frost and ice on front mullion by the light switch and the food was covered in a layer of frost. All functions are working expected. The frost and ice was removed by customer and has not returned. Found the liner had some gaps in it between the freezer and fresh food section. Caulked the gaps and the customer is going to monitor.

Customer stated the freezer food had frosted up. Some frost remains on the back wall but otherwise is working as expected. Seals are all good. Thermistors checked good in diagnostics and damper is working as expected. The customer is going to monitor.

"Customer complaint fresh food section too warm. Fresh food section at 32 degrees, set to coldest setting. Freezer at 5 degrees, set to max. Set freezer to recommended. Unit is working as expected."