"Customer stated unit will not run a cycle. Ran diagnostics and found F4E3 error and F6E3. Unit ran through diagnostic cycle with no issue. Inspected for broken wires and loose connectors, all check good. Ran on normal cycle and found wash motor does not run after second fill. Ordering control board.; rqstng P&A on 1 W11305303 (Control)"

"Found that bellows spring had come off and bellows was detached from front panel. Reattached bellows and spring, unit still leaking from bottom of door due to small tear in bellows. Customer does not want to repair at this time.; schdld next appmnt for 9/6 TUE !"

"Replaced ignitor, tested unit. Unit had gas and clicking however no spark to ignite it. Ordering Spark Module W10898291.; ordrng 1 W10898291 (Spark module)"

Door gasket wasnt sealing on the left side after doors swapped . Worked gasket and added vasoline to the gasket to help it slide . Unit is sealing and tested good

Customer saying freshfood section is warm . Temperature in freezer -1 . Freshfood was 38 . Checked fans . Thermistors In diagnostics. Changed defrost mode to basic from adaptive. Customer will monitor.