Replaced harness and control. Ran calibration and spin cycle successfully.

Found clogged drain hose preventing drain. Hose was never hung properlyTo prevent debris from collecting in the drain hose. Re routed hose. Recommending that the customer make sure the disposal drain properly before use. Left pump with the customer; dspstn on spec-tagged invntry: 1 W10876537 PUMP-DRAIN

Right front infinite switch has a shorted pilot. Right front burner limiter is also bad. Ordering burners and switch ; ordrng 1 W11047722 (Burner) and 1 WP3149400 (Switch) and 1 W11517959 (Burner lf) and 2 W11171119 (Burner rear lf rf)s

"Customer stated unit was not heating when in a cycle. I diagnosed unit verified that it was not heating. Checked voltage to unit, I took off front panel checked heating element and high limit fuse for continuaty. Fuse was ok but heating element needs replacing. ; ordrng 1 WP3387747 (Heating element)"

Customer stated unit was not draining. I diagnosed unit found that pump was getting voltage and turning. I checked drain hose and saw that it was clogged at the connection to the disposal. I cleared it out and tested it. Unit now drains properly.; dspstn on spec-tagged invntry: 1 W10876537 PUMP-DRAIN