"Customer stated that unit stopped working. Found error codes F0E9-OB pause , F0E5- off balance and F0E3-overload. Reset the unit and explained to the customer about overloading the unit. Unit tested good."

"Customer stated that unit was not cleaning the dishes. I ran a diagnostic test cycle and noticed that the unit was not getting water. I inspected unit and found a broken wire to water valve , repaired wire. Ran another diagnostic cycle in which the unit operated normally. Unit tested good ; dspstn on spec-tagged invntry: 1 W11085683 SUMP&MOTOR"

Unit was overfilling with water and stuck on sensing. Drained water from tub & cleaned debris from the pressure sensor hose. Ran a diagnostic test cycle in which unit operated normally. Ran a normal cycle- the unit filled with water and got passed the sensing into wash/agitate then drain & rinse and final spin. Unit completed a normal cycle without any issues. Unit tested good

"Replaced motor, unit tested good"

Replaced burner kit and front left electrode. Unit tested good