When you go to start a cycle the lid lock will click but it does not lock I replaced the lid lock and tested unit and it now works correctly ; dspstn on spec-tagged invntry: 1 W11307244 LATCH and 1 W11603810 CNTRL- ELEC

"Lid does not unlock, put unit into a manual test mode and tested lock I can hear it trying to unlock but does not ; dspstn on spec-tagged invntry: 1 W11307244 LATCH"

"Unit would spin on a diag cycle but when running a quick cycle or any other cycle it would not spin at the end. There was no error codes and spin speed was turned on all the way. I replaced the control board and ran a quick cycle, unit is spinning out at the end."

"Found unit not shifting to agitate. Found the actuator arm to be broken, cam is also sticking. Replaced the actuator and the cam. Tested unit out, unit is working properly; used 1 Wpw10006355 (Actuator), and 1 W10721967 (Cam) from stock"

"Customer reports all lights flashing, and unit unresponsive. Lid not locked, no water left in drum. Customer cycled power to unit, no change. Customer left unit unplugged for 4 days, and unit began working with no issues. No issues found during visit. No error codes stored, no problems in diagnostic cycle. All wiring connections secure. Customer to monitor unit"