Found that thermistor tested bad and was left side was frozen over used perma gum too seal leak on fill tube installed thermistor from truck stock unit tested good ; used 1 Wpw10383615 (Thermistor) from stock

Customer stated that they cant select cubed ice. I verified the issue. No codes. Ordering display control WR55X35529; ordrng 1 WR55X35529 (Display control)

Replaced compressor. Vacuumed unit down to 365 microns. Charged unit with 50 grams of R600a. Evaporator has a frost pattern i explained to the customer to give the unit 24 hours to get to temp. Unit tested good.

"Customer stated that unit is not cooling. After inspecting unit i found that the compressor is drawing 6.51 amps, compressor tested bad. Ordering compressor W11547313 and lokrings ; ordrng 1 W11547313 (Compressor) and 2 W11504420 (8/6)s and 2 W11504431 (7/5)s and 1 W11506622 (6.35nk) and 1 W11506635 (Access valve) and 1 W11506623 (5NK) and 1 W11504448 (5/1.8)"

"Replaced bad compressor. Vacuumed unit down to 500 microns. Charge unit with 4.9oz of R134a. New compressor was cutting off after starting, indicating a restriction. I then cut cap tube at the evap and installed a Lokring fitting but upon putting the cap tube back into position the cap tube broke at the liner. Called tech support and they marked unit unrepairable. I let the customer know that they must call customer relations. SR# 7736627011"