Customer states unit frosts up in freezer. Thermistor and heater test good ordering control. ; ordrng 1 W11546690 (Control)

Customer states burning smell. Found motor bad it has overheated and caught lint on fire inside dryer. Ordering motor assembly and blower wheel.; ordrng 1 W11549461 (Motor assembly) and 1 WP697772 (Blower wheel)

Customer states freezer is all frosted up and not cooling. Found unit not defrosting. Replaced freezer thermistor. Unit is operating as designed.; used 1 WPW10383615 (Thermistor) from stock

Customer states refrigerator is warm. Found unit not defrosting. Ordering heater and harness. ; ordrng 1 W11546681 (Harness) and 1 W11546610 (Heater)

"Customer stated that the unit was throwing a error code when the cycle was completed. Error codes F3E1-water level system failure & F8E3-overflow condition. I ran a diagnostic test cycle in which the unit operated normally. I cleared the debris from the pressure sensor hose and boot. I asked the customer to monitor the situation after cleaning the pressure hose & boot, if problem persists then the unit will need a new pressure sensor W10448876"