Customer stated that unit is not heating. Verified the issue. After inspecting unit i discovered the the coil valve tested bad. Replaced coil. Unit tested good

"Customer stated that the unit is sometime displaying an error code. The customer showed me the code and i explained to them that it is not an error code as its a indicator light that shows the door is left open. Fresh food temp 38.4 and freezer temp .09. Ran service test 1 through 13 with no errors. I did find that the freezer bin was not snapped into place , i reinstalled freezer bin. Unit tested good"

Customer stated that they are hearing a noise. No codes. After inspecting unit and speaking with the customer i found that the noise the customer is hearing is the fill valve and ice maker operation. I explained to the customer that those are normal sounds. Unit tested good.

"Customer stated that the unit is taking hours to get the oven up to 350. Tested unit and it would not get up past 220 degrees, i then replaced temp sensor. Tested unit again and the unit would only get to 295 degrees on a 350 setting. Ordering control W10884488; rqstng P&A on 1 W10884488 (Control)"

Customer stated that oven is not heating. Upon inspection i discovered that the bake element tested bad. Replaced bake element. Unit tested good.